Electrical Inspections
An electrical inspection provides inspection services for all commercial and industrial buildings, and verifies compliance with the electrical code.
About Inspection
The intent of electrical inspection is to ensure compliance with the applicable electrical code in order to reduce personal, and structural electrical hazards.
Also, the inspector ensures that the correct product or equipment has been selected for the job, and verifies the proper installation and compliance with the Departmental approved plans, if applicable.
Additional Resources
- Code Amendment
- Inspection Forms
- Electrical Test Labs
Filtered categories:
Supplemental Correction Sheet for Chapter 95 (for 2011 Codes)
PC/STR/Corr.Lst.33-2010
Supplemental Correction Sheet for Concrete Shear Wall (for 2011 Codes)
PC/STR/Corr.Lst.34-2010
Supplemental Correction Sheet for Concrete Tilt-Up Retrofit (for 2011 Codes)
PC/STR/Corr.Lst.36-2010
Supplemental Correction Sheet for Curtain Wall (for 2011 Codes)
PC/STR/Corr.Lst.37-201
Supplemental Correction Sheet for Flexible Diaphragm (for 2011 Codes)
PC/STR/Corr.Lst.38-2010
Supplemental Correction Sheet for Prestress Concrete (for 2011 Codes)
PC/STR/Corr.Lst.43-2010
Supplemental Correction Sheet for Steel Frame Design (for 2011 Codes)
PC/STR/Corr.Lst.44-2010
Supplemental Correction Sheet for Steel Moment Frame Design (for 2011 Codes)
PC/STR/Corr.Lst.52-2010
Filtered categories:
Supplemental Correction Sheet for Chapter 95 (for 2011 Codes)
PC/STR/Corr.Lst.33-2010
Supplemental Correction Sheet for Concrete Shear Wall (for 2011 Codes)
PC/STR/Corr.Lst.34-2010
Supplemental Correction Sheet for Concrete Tilt-Up Retrofit (for 2011 Codes)
PC/STR/Corr.Lst.36-2010
Supplemental Correction Sheet for Curtain Wall (for 2011 Codes)
PC/STR/Corr.Lst.37-201
Supplemental Correction Sheet for Flexible Diaphragm (for 2011 Codes)
PC/STR/Corr.Lst.38-2010
Supplemental Correction Sheet for Prestress Concrete (for 2011 Codes)
PC/STR/Corr.Lst.43-2010
Supplemental Correction Sheet for Steel Frame Design (for 2011 Codes)
PC/STR/Corr.Lst.44-2010
Supplemental Correction Sheet for Steel Moment Frame Design (for 2011 Codes)
PC/STR/Corr.Lst.52-2010
Filtered categories:
Unreasonable Hardship Determination (for 2011 Codes)
PC/DAD/FormA-2013
Unreasonable Hardship Determination (for 2011 Codes)
PC/DAD/Mod6-2011
Untreated Gray Water Correction Sheet (for 2017 Codes)
PC/MECH/Corr.Lst.107-2017
Use a Scale per Foot Smaller than 0.125 Inch for Site Utility Drawing
PC/ELEC/Mod16-2017
Use of Sump Pumps for Surface and Subsurface Drainage
IB/P/BC 2023-103
- Effective
Virtual Inspection Program Participation Agreement Waiver and Release of Liability