Public Housing - Supplemental Plan Review Checklist No. 9
Identifier
PC/DAD/Corr.Lst.09-2018
Commercial Accessibility Plan Check Correction List
Attachment
/sites/default/files/efs/forms/pc17/commercial-accessibility-plan-check-correction-list.pdf
EVCS - Electric Vehicle Charging Stations
Identifier
PC/DAD/Corr.Lst.10-2018
Attachment
/sites/default/files/efs/forms/pc17/supplemental-plan-review-checklist-no-10---evcs-electric-vehicle-charging-stations.pdf
When/Where are truncated domes required?
Detectable warnings/truncated domes are required at platform edges, curb ramps, islands or cut-through medians, bus stops, hazardous vehicular areas, reflecting pools, and track crossings.
What is the size of the DA van parking stall?
Van stall must be 9’ wide (with 8’ wide loading area) by 18’ long, or 12’ wide (with 5’ wide loading area) by 18’ long.
When did DA requirements for apartments come into effect?
DA requirements for apartments came into effect on March 13, 1991.
Which code chapter does the leasing office need to comply with (11A or 11B)?
11B, as it is open to the public.
When does a remodel trigger DA requirements?
Yes. DA compliance triggers per 11B-202 of LABC, when there is an alteration to a building or site as defined in Chapter 2, Section 202 of the Building Code.
However, some exceptions apply, such as projects only consisting of heating, ventilation, air conditioning, or cosmetic works like painting, wallpapering, etc. There are also general exceptions that exempt DA compliance, such as construction sites, raised areas, and machinery spaces, per 11B-203 of the LABC.
However, some exceptions apply, such as projects only consisting of heating, ventilation, air conditioning, or cosmetic works like painting, wallpapering, etc. There are also general exceptions that exempt DA compliance, such as construction sites, raised areas, and machinery spaces, per 11B-203 of the LABC.
What is considered sufficient turning space?
Turning space shall be a circular space of 60” diameter, or a T-shaped space with a 60” length for arms width, and a base that is 36” wide. See 11B-304.3.2.
What is the minimum/maximum reach range?
15” minimum
48” maximum